Tuesday 28 April 2015

Still Hold The Record


I was recently looking into records for concrete pumping and was pleasantly surprised to find that we still hold the word record for vertical distance pumping of 715m which was achieved using a Schwing SP4000S stationary concrete pump by the team working on the Parbati Hydroelectric Project in northern India back in 2009.

The project was to create two pressure shafts each 1550 m long x 3.5 m diameter inclined at 30° to create a vertical drop of 750 metres. The main contractors, Gammon India Limited, chose Schwing-Stetter to provide all the concreting equipment for the job including batching plants, transit mixers and concrete pumps.

The two tunnels had to first be excavated with a TBM from the bottom up and then a steel liner was installed by lowering each 6 meter section from the top and welding it in place as they went. The surrounding annulus then needed to be back-filling with concrete (around 7,000m³ for each shaft) and this was pumped from the foot of the shaft upwards over a total 1.5km length (and vertical rise of 750m) and into place. We are talking nearly ¾ of a kilometre upwards here!

A total distance pumped of 1½km in a single line push would be impressive in it's own right without even having any vertical component. Setting the vertical record at 715 metres at the same time is astonishing.

The concrete pressure reached was over 220 bar as they pumped to the top section and the concrete at the top continued to flow at 12m³/hr.

What is even more astonishing is that the SP4000 which did the work is a medium range pump and not even Schwing's most powerful model, which is the SP 8800. In addition to that, the only ware parts that needed changing  during the 7,000m³ concrete pour (plus around 2,000m³ of water) were two kidney seals.

To get some idea of the high specification of the machinery we are dealing with here, when cleaning out the pipe with water any gap between the main wearing parts in the pump would have made it impossible to generate the water pressure required. It would have come squirting out of the smallest of gaps. However even after setting such a record pumping concrete, the SP4000 was able to pump water at this pressure - proof of the self-sealing and low wear features of the Schwing ROCK valve.

The Schwing SP4000 not only set the world record for concrete pumping, it took the world record in its stride and kept going! What an amazing piece of engineering!


Tuesday 21 April 2015

Schwing Visible From Space


It seems our equipment has been captured by the Google satellites working away in Chiswick last year. If you visit W4 5XU on Googlemaps you will see building No 7 of the Chiswick Park development in the process of being built. Circled above are the low emission Schwing SP2800 static pump and the SPB30 placing boom used to build the new 12 floor, 31,000 m2 building designed by Rogers Stirk Harbour & Partners.

Thanks to Andrew from Camfauds who kindly alerted us to this. They were supplying the Schwing concrete pumping equipment to Careys who had the contract for the building.

The structural work was finished earlier this year and building No 7 is currently being fitted out and should be ready for new tenants towards the end of the year.


Friday 17 April 2015

Reaching Inside


We recently wanted to show how manoeuvrable the boom on one of our S36X mobile concrete pumps is. By way of demonstration we parked it near the entrance to our workshop and poked the boom in through the door to show how easily it can reach into an enclosed space.

As can be seen above the large rotation angle of the tip section (238° since you ask) not only makes it easy to steer the boom into such a space but also increases its flexibility once in place.

As you can also (just about) see, it was positioned using a radio remote (via a Vector control system) - so you can easily position yourself where you can best see what's going on.

I know that I was impressed!


Friday 10 April 2015

Innovation Award Shortlist

Back in February I mentioned that we had just solved a problem with a bit of innovative customisation regarding the opening of the drum flap on a mixer truck. Well it seems that the client wasn't the only one impressed by the work.

We have been shortlisted for the 'London Innovation of the Year' category of the London Construction Awards 2015.

Its nice to have our work recognised and it certainly shows what a great engineering team we have here. Here is a picture of the finished open drum flap on the truck having now been painted up.

If you want to see it actully working - there are a couple of short videos on our website customisation page here...