The people at our Head Office in Germany have been busy of late. Alwyne, one of our very good sales chaps came back from Bauma with a memory stick for me with some really good animations which the Germans had put together. They show the new S 38 SX 'Reptor' boom opening and reaching into some really tight spots.
One of this blogs most popular posts has been the one showing the S 36 S reaching into the workshop space. These animations show how the new Reptor (as in Reptile - Snake like flexibility...) can reach into a difficult space in a similar manner, and also shows it opening up under a restricted height (7.4 metres since you ask).
I have put them both on a new web page on out website. You can also see them below...
Wednesday, 11 May 2016
Monday, 9 May 2016
Boom Up Stairs
Creating such a series was as interesting challenge as it's not a just a quick photo cut up and stuck on the wall.
A second visit to the S 52 SX at Merseylink was organised (thanks to Paul and Mark at Reilly's) which was luckily a short pour so the pump operator had the time afterwards to raise the boom to the right angle to get the shots. I wanted the angle to roughly match the angle of the stairs so it could reach from the lower left corner of the space to the upper right one.
There is actually a bit of overlap there on the finished canvasses - making the boom look a little longer compared to the size of the truck, but for a boom that can reach the other end of an Olympic sized swimming pool anyway, the exaggeration is quite small - the S 52 SX really is an impressive piece of equipment.
A few calculations were required to get them in their correct positions on the wall with the whole display centred properly but I think people would agree that the finished display was worth the effort.
Subscribe to:
Posts (Atom)